Expired Product
Chainsaws

576 XP® W

Chainsaw 576XP

Our most advanced saw for demanding professional use. It features our new X-Torq® engine that provides high torque over a very wide rpm range, combined with low fuel consumption and low exhaust emission levels. Full wrap handle bar provides in situations when you need to turn the saw over or cut from awkward angles. Smart Start® for easy starting and Air Injection makes the saw run stronger and longer.

  • Cylinder displacement
    73.5 cm³
  • Handle type
    Standard
  • Weight (excl. cutting equipment)
    6.9 kg

FEATURES

Want to take a closer look? Learn more about the product in depth by exploring its design and features.

Air Injection™

Centrifugal air cleaning system for reduced wear and longer operating time between filter cleanings.
X-Torq

Powerful and Efficient X-TORQ® Engine

Our X-TORQ® engines deliver great power and torque thanks to highly efficient combustion.

Adjustable oil pump

Adjustable oil pump makes it easy to set the chain lubrication according to your needs.
346XP, 353

Quick-release air filter

Facilitates cleaning and replacement of the air filter.
565

Air Injection™

Centrifugal air cleaning system for reduced wear and longer operating time between filter cleanings.

X-Torq

Powerful and Efficient X-TORQ® Engine

Our X-TORQ® engines deliver great power and torque thanks to highly efficient combustion.

346XP, 353

Adjustable oil pump

Adjustable oil pump makes it easy to set the chain lubrication according to your needs.

565

Quick-release air filter

Facilitates cleaning and replacement of the air filter.

Specifications

Do you need further details to make the right decision? Learn more in the specifications section below. Locate your dealer

Engine

Output shaft power
4.2 kW
Cylinder displacement
73.5 cm³
Maximum power speed
9600 rpm
Max engine/motor
13300 rpm
Idling speed
2700 rpm
Torque, max.
4.5 Nm
Torque, max. at rpm
8100 rpm
Clutch engagement speed (±120)
3900 rpm
Fuel consumption
417 g/kWh
Fuel consumption
1.77 kg/h
Spark Plug
NGK BPMR7A, Champion RCJ7Y
Electrode gap
0.5 mm
Ignition module air gap
0.5 mm
Oil pump type
Adjustable flow
Oil pump capacity, max
22 ml/min
Oil pump capacity, min
5 ml/min
Exhaust emissions (CO₂ EU V)
849 g/kWh [1]

Included with Purchase

Recommended bar length, max
28 in
Recommended bar length, min
15 in

Dimensions

Weight (excl. cutting equipment)
6.9 kg

Lubricant

Oil tank volume
0.4 l
Oil pump type
Adjustable flow
Oil pump capacity, max
22 ml/min
Oil pump capacity, min
5 ml/min

Sound and Noise

Sound power level, guaranteed (LWA)
116 dB(A)
Sound power level, measured
114 dB(A)
Sound pressure level at operators ear
105 dB(A)

Vibration

Equivalent vibration level (ahv, eq) front handle
5.1 m/s²
Equivalent vibration level (ahv, eq) rear handle
4.8 m/s²
[1] This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.
Husqvarna

Parts & Accessories

Select from a range of original accessories and parts to augment your product and enhance your experience.

FIND AN AUTHORISED HUSQVARNA DEALER

Find your nearest Husqvarna dealer. Enter your postcode in the box below and press the orange 'search' button.
You might need to accept that the browser uses your current location
Reset filters
You can find dealers by performing a search above or zooming in on the map.