How-To-Guides

How to reset a Husqvarna Fleet machine sensor

In some cases, it can be useful to do a reset of your Husqvarna Fleet machine sensor, for example, if you find that it is not collecting data, but has a working battery. Here is how:

To reset a Husqvarna Fleet machine sensor:

  1. Verify that you have selected the correct asset (model etc.) in Husqvarna Fleet Services™.
  2. Remove the cap of the machine sensor housing.
  3. Remove the sensor from the housing of the asset.
  4. Remove the battery from the machine sensor.
  5. Wait for 60 seconds (for the capacitor to fully discharge).
  6. Reinstall the battery.
  7. Make sure there is an active gateway nearby for time synchronization of the sensor.
  8. Reinstall the machine sensor in the housing.
  9. Reattach the cap of the housing.
  10. Run the machine for a minimum of 30 seconds to register and configure the machine sensor.

For more information on activation, pairing, and installation of machine sensors, see How to install a Husqvarna Fleet machine sensor for use with Husqvarna Fleet Services™.

Hjälpte det här?

Har du fler frågor? Besök vår självservice för digitala tjänster.

Hitta praktiska tips och råd om appar och digitala tjänster, till exempel Husqvarna Connect, Automower® Connect, Husqvarna Fleet Services och vår smarta hem-integration. Du kan även söka på ett specifikt ämne.

Besök vår självservice för digitala tjänster