Send us your question or comments. We will get back to you as soon as possible.
1300 804 105
Monday - Friday | 08.00-17.30
UserMenu_Hello
If you notice the error LED flashing on your lawn mower, there can be several causes for this issue.
Select the issue that best describes your situation:
Note that number of flashes can differ depending on your lawn mower.
WARNING: Use protective gloves when handling the blade. The blade is very sharp and cuts can easily occur.
Turn the safety key to 0 to prevent accidental starts. Remove the battery and wait a minimum of 5 seconds.
Remove potential obstacles and make sure that the blade can rotate freely.
If the problem continues, contact your local authorised dealer.
The cutting height is set too low causes poor cutting results if the blade or cutting deck drag in the soil.
Set the cutting height to the correct position:
Stop the product, take out the battery and wait until it has become cool.
Note that number of flashes can differ depending on your walk-behind mower.
Increase the cutting height:
Put the battery in the product correctly and check the battery connector. If the error LED on the battery flashes, refer to the battery status chart in your operator's manual.
If the motor brake handle has been engaged before the motor starts, release the motor brake handle and wait for approximately 5 seconds. Push the motor brake handle down again to start the product.
Find great tips and advice regarding apps and digital solutions, such as Husqvarna Connect, Automower® Connect, Husqvarna Fleet Services and Smart Home Integration.
Your personal selections from our range of products.