Usage


How to fit the cutting deck on your Husqvarna front mower

The flexibility of your Husqvarna front mower means that you can quickly adapt it to the work at hand, or for new tasks for the season.

No Image Available
How to Front mower service position P500-series 1m58s 16:9 AT

Guide to mounting cutting deck:

  1. Ride the machine to the cutting deck.
  2. Lower the lift arms to the cutting deck attachment points. Warning! If the help function is engaged the lift arms will move with great force when you release the lift lever. Be careful to avoid trapping your hand. There is a risk of crush injuries.
  3. Activate the parking brake and turn off the engine.
  4. Insert the bolts for the link joints and the pins on both sides of the cutting deck.
  5. Fit the universal drive shaft to the cutting unit. The propeller shaft is marked with an arrow indicating the direction in which it is to be connected to the power take-off on the machine. Slide back the ring to release the quick coupling and the universal drive shaft can be pushed onto the shaft journal.
  6. Secure the front locking chain to the universal joint cover around the cross pipe.
  7. Ensure the rubber casing is folded over the front universal joint.
  8. Remove the service hatch.
  9. Couple the rear of the propeller shaft to the power take-off on the machine.
  10. Fit the locking chain to the universal joint cover around the lifting beam.
  11. Refit the service hatch.
  12. Start the engine and lift the cutting unit halfway up.
  13. Turn off the engine.
  14. Fit the lifting eyes that are attached to the lift arms. Pull out the catch and press in the lifting eye. There is one for each lift arm.
  15. Fit the lifting eyes that are attached to the lift arm. Pull out the catch and press in the lifting eye. There is one for each lift arm.
  16. Check and adjust the tilt angle of the cutting unit.

Related articles

  • Smart home integration Automower
    Usage

    How Automower® Connect Integrates With Your Smart Home

    Originally created in 2015 as part of Husqvarna’s advanced anti-theft features, Automower® Connect was developed as a way to track a stolen Automower® in real-time. However, as technology has advanced over the last 6 years, so have the capabilities of Automower® Connect. 

  • Illustration Use Automower Lesson #3
    Usage

    Automower® - Where do the grass clippings go?

    By far the most common question we get asked when someone first sees an Automower® is - Where do the grass clippings go?

  • Pole hedgetrimmer 536LiHE3
    Usage

    How To Trim Tall & Wide Hedges

    Keeping on top of tall and wide hedges can be challenging, even for professionals. From keeping your balance on top of a ladder, to struggling to reach across wide hedges or down tight spaces - maintenance is necessary, but is no easy task.