Usage


How to start your Husqvarna Rider

When starting your Husqvarna Rider, make sure you follow these simple steps.

No Image Available

Checklist when starting your Rider:

  1. Ensure the bypass arm is in the inner position
  2. If you have an AWD, there is one arm for each axle
  3. When you are seated the seat switch should be engaged
  4. Lift the cutting deck by pulling the lever to the transport position
  5. Engage the parking brake
  6. If the engine is cold use full choke
  7. Put the throttle in mid position
  8. When the engine starts, immediately release key
  9. Gradually disengage the choke

Related articles

  • Smart home integration Automower
    Usage

    How Automower® Connect Integrates With Your Smart Home

    Originally created in 2015 as part of Husqvarna’s advanced anti-theft features, Automower® Connect was developed as a way to track a stolen Automower® in real-time. However, as technology has advanced over the last 6 years, so have the capabilities of Automower® Connect. 

  • Illustration Use Automower Lesson #3
    Usage

    Automower® - Where do the grass clippings go?

    By far the most common question we get asked when someone first sees an Automower® is - Where do the grass clippings go?

  • Pole hedgetrimmer 536LiHE3
    Usage

    How To Trim Tall & Wide Hedges

    Keeping on top of tall and wide hedges can be challenging, even for professionals. From keeping your balance on top of a ladder, to struggling to reach across wide hedges or down tight spaces - maintenance is necessary, but is no easy task.