What are you looking for?
Recommended products based on your search

Usage

How to get your chainsaw started

Believe it or not, but “how do I start a chainsaw?” is a common question (or at least a frequent Google search) amongst chainsaw users. In this guide we’ve put together some tips on how to get your saw ready to perform.

There are two correct ways to start your chainsaw: on the ground or with the saw between your legs. No matter which starting method you choose, remember that the chain brake should always be activated. Many chainsaw models can be started in what is known as half-throttle position. If the brake is not activated when starting one of these models, the chain may rotate.

Starting a cold engine

  1. Activate the chain brake.
  2. If the model is equipped with a decompression control – press this.
  3. Activate the choke. If the saw is equipped with Air Purge/fuel pump, press the bulb a few times until the fuel is visible inside it and thereby enters the carburettor.
  4. Starting on the ground: Put your right foot in the rear handle and keep a firm grip on the front handle with your left hand. Starting with the saw between your legs: Place the rear handle between your thighs and behind your right knee. Hold the front handle firmly with your left hand.
  5. Pull the starter handle with your right hand. Repeat until the engine fires.
  6. Push the choke (half-throttle) and pull until the saw starts.
  7. Accelerate so that the engine idles and then release the chain brake.

Starting a hot engine

When the engine is hot, it’ll start without the choke. Follow the instructions above, but disregard the points relating to the choke. If the engine is difficult to start, apply half-throttle. You access the half-throttle function by first fully activating the choke, then moving the control back.

Husqvarna 346 XP® G E-TECH®

Chainsaw 346XPG E-TECH
Heated handles
Heated Carburettor
Air Injection™ Technology
Adjustable Oil Pump

Related articles

  • Usage

    How to start a Husqvarna chainsaw

    When starting a chainsaw you should always ensure to heed all safety precautions. Never start the saw engine without the bar, chain and clutch cover (chain brake) assembled - or else the clutch can come loose and cause serious injuries.  Always move the saw away from the fuelling area before starting. Place the saw on clear ground and ensure that the chain is not in contact with anything. Also, ensure that you have a secure footing. Keep people and animals well away from the working area.

  • Usage

    Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris congue vulputate erat hendrerit tincidunt.

  • Usage

    Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris congue vulputate erat hendrerit tincidunt.