What are you looking for?
Recommended products based on your search

How-To-Guides

How to check and replace engine oil in a lawn mower

Updated 22 May, 2024

This is an article on how to check and replace lawn mower oil in a Husqvarna lawn mower. If you are looking for information on how to check and replace engine oil in a Husqvarna ride-on mower, click here.

For your lawn mower to function optimally, make sure that you change the lawn mower oil each year. It is best to do this before the start of the season.

How to check lawn mower oil level

CAUTION: An oil level that is too low can cause damage to the engine. Check of the lawn mower oil in your lawn mower before you start it.

  1. Park the product on level ground and stop the engine. 
  2. Remove the oil tank cap with the attached dipstick. 
  3. Clean the oil from the dipstick.
  4. Put the dipstick fully into the oil tank to give the correct picture of the oil level. 
  5. Remove the dipstick.
  6. Examine the oil level on the dipstick.
  7. If the oil level is low, fill with engine oil and do a check of the oil level again. When filling the tank with oil, use a funnel to prevent any spills.

NOTE: Make sure to use the recommended engine oil for your specific lawn mower. You can check this in the operator’s manual. Do not mix two different types of oil.

How to replace lawn mower oil

WARNING: Lawn mower oil is very hot directly after the engine is stopped. Let the engine cool off before you drain the lawn mower oil. If you spill the oil on your body, clean with soap and water.

How to change the oil by using an oil pump
  1. Disconnect the spark plug wire from the spark plug and place the wire where it cannot come into the contact with a spark plug.
  2. Remove the engine oil cap/dipstick; lay aside on a clean surface.
  3. Use a pump to empty the oil. Clean the mouth piece when you have finished to avoid oil spillage.
  4. Check that all oil is removed using a dipstick.
  5. Fill the tank with a recommended engine oil. You can find the correct engine oil type in your product's operator's manual. Do not mix two different types of oil. We recommend using Husqvarna SAE 30 engine oil.
  6. Use the dipstick to check the engine oil level.
How to change oil by leaning your lawn mower
  1. Run the lawn mower until the tank is empty.
  2. Remove the ignition cable from the spark plug.
  3. Remove the oil tank cap.
  4. Put the container below the lawn mower to collect the engine oil in and prevent any spills.
  5. Tilt the product to drain the engine oil from the oil tank.
  6. Fill the tank with a recommended engine oil. You can find the correct engine oil type in your product's operator's manual. Do not mix two different types of oil. We recommend using Husqvarna SAE 30 engine oil.
  7. Do a check of the engine oil level.

 

Was this helpful?

Could not find what you were looking for?

Please use the button below to send us your question related to our apps and digital solutions.

Send us your question

Product related questions

The Digital Solutions Self-Service handles topics related to the Husqvarna apps and digital solutions. 

Do you have questions about your Automower® robotic lawn mower, lawnmower, chainsaw, trimmer, brush cutter or hedge trimmer? Ask our product assistant. For all other product-related questions, please visit the dealer locator to find your closest dealer.

More questions? Go to our Digital Solutions Self-Service.

Find great tips and advice regarding apps and digital solutions, such as Husqvarna Connect, Automower® Connect, Husqvarna Fleet Services and Smart Home Integration. You can also search a specific topic or send us a question.

Visit the Digital Solutions Self-Service