Troubleshooting

Troubleshooting pairing issues with the Automower® Connect app during an EPOS™ installation

When installing your Automower® NERA robotic lawn mower equipped with EPOS™ technology, following the installation steps in the correct sequence is key.
 
If you are having trouble pairing your mower to the Automower® Connect app, it could be due to early mounting of the EPOS™ Plug-in module on the mower. To resolve this, try the following:
  1. Remove the robotic lawn mower from the charging station and turn it off.
  2. Disconnect the EPOS™ Plug-in cable from the mower and leave it disconnected.
  3. Turn on the mower.
  4. Retry pairing the mower to the Automower® Connect app.
  5. Turn off the mower.
  6. Reconnect the EPOS™ Plug-in cable.
  7. Place mower in the charging station and turn it on.
  8. A new firmware update will start, which can take up to an hour.
  9. Continue with the next step of the EPOS™ installation: Husqvarna Automower® virtual boundary installation guide.

Important

  • Do not skip the cloud pairing in the app. Skipping the pairing will prevent the mower from downloading firmware updates, which are necessary to complete the EPOS™ installation. 
  • If you own an Automower® 310E NERA or an Automower® 320 NERA, it is important that you do not skip the Wi-Fi pairing during the EPOS™ installation. Skipping the pairing will prevent the mower from downloading firmware updates, which are necessary to complete the installation. 
For personalised assistance with your robotic lawn mower, please contact your local Husqvarna dealer.

Was this helpful?

More questions? Go to our Digital Solutions Self-Service.

Find great tips and advice regarding apps and digital solutions, such as Husqvarna Connect, Automower® Connect, Husqvarna Fleet Services and Smart Home Integration. You can also search a specific topic or send us a question.

Visit the Digital Solutions Self-Service