Send us your question or comments. We will get back to you as soon as possible.
UserMenu_Hello
Get tips on how to handle and maintain your tools, or learn from the professional users.
Husqvarna cares about your satisfaction, from the moment that you select and purchase our products and accessories, to your professional daily use and need for support. Our experts are always ready to assist you in getting the most out of your experience.
If you notice error LED flashing on your lawn mower, there can be several causes for this issue.
Select the issue that best describes yours:
Note that number of flashes can differ depending on your lawn mower's.
WARNING: Use protective gloves when handling the blade. The blade is very sharp and cuts can easily occur.
Turn the safety key to 0 to prevent accidental start. Remove the battery and wait a minimum of 5 seconds.
Remove possible obstacles and make sure that the blade can rotate freely.
If the problem continues, contact your local authorized dealer.
Cutting height set too low causes poor cutting results if the blade or cutting deck drag in the soil.
Set the cutting height to the correct position:
Stop the product, take out the battery and wait until it has become cool.
Note that number of flashes can differ depending on your walk behind's mower.
Increase the cutting height:
Put the battery in the product correctly and examine the battery connector. If the error LED on the battery flashes, refer to the battery status chart in your operator's manual.
If the motor brake handle has been engaged before the motor starts, release the motor brake handle and wait for approximately 5 seconds. Push the motor brake handle down again to start the product.
Find great tips and advice regarding apps and digital solutions, such as Husqvarna Connect, Automower® Connect, Husqvarna Fleet Services and Smart Home Integration. You can also search a specific topic or send us a question.
Your personal selections from our range of products.