Destination not reachable – Automower® with EPOS™ Technology error message

The message Destination not reachable may indicate issues with the creation of transport paths or stay-out zones. 

Common causes:

• A stay-out zone is preventing the mower from reaching a section of the work area. Ensure that no work area is located behind a stay-out-zone, making it unreachable for the mower.
• The creation of a stay-out zone has resulted in a passage that is too narrow for the mower. Passages must be a minimum of 1 m / 3.3 ft wide. 
• A stay-out zone overlaps with a transport path and prevents the mower from following the transport path. Ensure that stay-out zones and transport paths don't overlap.
• The final waypoint of the transport path is placed between the charging station and the docking point. The mower can therefore not reach the charging station.  Ensure placing the last waypoint in front of the docking point, creating a straight line for the mower to enter the charging station.
• The corridor width for the transport path is less than 2 m / 7 ft. Depending on the shape or design of the lawn, a transport path narrower than 2 m / 7 ft may prevent the mower from following the transport path and reaching its destination. Set the corridor width for the transport path to a minimum of 2-5 m / 7-16 ft.

Important:

• Transport paths have to be created starting from the work area in direction to the charging station's docking point. It will not work if the transport path starts from the charging station's docking point in direction to the work area.
• For each work area a separate transport path has to be created. One transport path connecting different work areas will not work. 

Find more details about these issues and solutions in the Product Assistant.

Open product assistant