How to use a drive on lawn mower wheels

Question

Accepted Answer

In this article you will find out how to use a drive on your Husqvarna lawn mower.

If you want to use the drive on the wheels on your lawn mower, there are different ways to utilise it depending on what kind of lawn mower you own:

Drive bail on lawn mower

Start the product.
Optional: Pull down the engine brake handle to start the engine.
Pull the drive bail in the direction of the upper handle to start the drive.
Use the lever to set the drive speed, if this applies to your model. H320-0691
Release the drive bail to disengage the drive, for example when you go near an obstacle. Note that if you release the engine brake handle, the drive will automatically be released.
Before you pull the product backwards, disengage the drive and push the product forwards approximately 10 cm. This will release the lock on the wheels.

Note that on battery-powered products, you can use the drive with or without the blade being engaged.

Pull the drive bail in the direction of the upper handle to start the drive.
Push the + and - buttons to set the drive speed, if this applies to your model.
Release the drive bail to disengage the drive, for example when you go near an obstacle. Note that if you release the motor brake handle, the drive will automatically be released.
Before you pull the product backwards, disengage the drive and push the product forwards approximately 10 cm.

Start the product.
Optional: Pull down the engine brake handle to start the engine.
Pull the drive lever in the direction of the handlebar to start the drive.
Push the + and - buttons/dials to set the drive speed, if this applies to your model. Use the lever to set the drive speed, if this applies to your model.
Push the drive lever away from the handlebar to disengage the drive, for example when you are near an obstacle. Note that if you release the engine brake handle, the drive will automatically be released.
Before you pull the product backwards, push the drive lever away from the handlebar and push the product forwards approximately 10 cm to fully disengage the drive.

Note that on battery-powered products, you can use the drive with or without the blade being engaged.

Pull the drive control lever up to start the drive.
Push the + and - buttons to set the drive speed, if this applies to your model.
Push the drive control lever down to disengage the drive, for example when you are near an obstacle. Note that if you release the motor brake handle, the drive will automatically be released.
Before you pull the product backwards, push the drive lever away from the handlebar and push the product forwards approximately 10 cm to fully disengage the drive.

For personalised assistance with the product , please contact your local Husqvarna dealer.