Brushcutters

Husqvarna 555RXT

Petrol Brushcutter 555RXT

Husqvarna 555RXT is a very powerful brushcutter developed for full time work in tough conditions. The X-Torq® engine provide raw power, rapid acceleration and excellent fuel economy. Long shaft and bevel gear angled 35 degrees simplifies wider sweeps. Very low vibrations thanks to LowVib®. Delivered with Balance XT harness.

  • Cylinder displacement
    53.3 cm³
  • Weight (excl. cutting equipment)
    9.2 kg
  • Harness
    Balance XT
  • Equivalent vibration level (ahv, eq) left handle
    1.5 m/s²
£1,239.00 Rec. retail price inc. VAT

FEATURES

Want to take a closer look? Learn more about the product in depth by exploring its design and features.

345Rx, 343R

Adjustable handle bar

Adjustable and ergonomically designed handlebar for best comfort.
X-Torq

X-Torq® engine

The X-Torq® engine design increases torque over a wider rpm range providing maximum cutting power.

Long shaft

Long shaft providing extended reach, facilitating grass clearing.
345Rx, 343R

Balance XT

Ergonomic harness with broad back support, shoulder straps and hip belt that distributes the load over a larger area. Adjustable back plate for perfect fit.
Harness Balance XT
345Rx, 343R

Adjustable handle bar

Adjustable and ergonomically designed handlebar for best comfort.

X-Torq

X-Torq® engine

The X-Torq® engine design increases torque over a wider rpm range providing maximum cutting power.

345Rx, 343R

Long shaft

Long shaft providing extended reach, facilitating grass clearing.

Harness Balance XT

Balance XT

Ergonomic harness with broad back support, shoulder straps and hip belt that distributes the load over a larger area. Adjustable back plate for perfect fit.

Specifications

Do you need further details to make the right decision? Learn more in the specifications section below. Locate your dealer

Engine

Power output
2.8 kW
Cylinder displacement
53.3 cm³
Maximum rpm output shaft
10500 rpm
Maximum power speed
9000 rpm
Idling speed
2800 rpm
Clutch engagement speed (±120)
4100 rpm
Torque, max.
3.5 Nm
Torque, max. at rpm
6900 rpm
Fuel tank volume
1.1 l
Fuel consumption
480 g/kWh
Fuel consumption
1.34 kg/h
Output shaft thread
M12x1.75V
Spark Plug
NGK BPMR7A
Electrode gap
0.5 mm
Exhaust emissions (CO₂ EU V)
1000 g/kWh [1]

Transmission

Gear ratio
1.47
Drive gear angle
35 °

Dimensions

Weight (excl. cutting equipment)
9.2 kg
Tube length
1483 mm
Tube diameter
35 mm

Included with Purchase

Grass blade
Multi 350-3
Harness
Balance XT
Trimmer head
T55X M12

Lubricant

Lubricant type (Engine)
Husqvarna 2 stroke or equiv. at 50:1
Lubricant type (bevel gear)
Biodegradable grease

Sound and Noise

Sound power level, guaranteed (LWA)
121 dB(A)
Sound power level, measured
119 dB(A)
Sound pressure level at operators ear
101 dB(A)

Emission

Exhaust emissions (HC average) EU
52.86 g/kWh
Exhaust emissions (HC average) EPA
59.61 g/kWh
Exhaust emissions (CO average) EU
239.74 g/kWh
Exhaust emissions (CO average) EPA
278.42 g/kWh
Exhaust emissions (NOx average) EU
1.72 g/kWh
Exhaust emissions (NOx average) EPA
1.69 g/kWh
[1] This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.
Husqvarna

Parts & Accessories

Select from a range of original accessories and parts to augment your product and enhance your experience.

You might need to accept that the browser uses your current location
Reset filters
You can find dealers by performing a search above or zooming in on the map.